SVS200 LUN Manager and Volume Manager (T1714-96015, October 2007)

Changing a host

group's name and host mode

NOTE:

• You cannot perform this operation on host groups for initiator ports.

• You cannot per

formthisoperationonhostgroupsforNASports.

CAUTION:

Before changing a host group's host mode, HP recommends that you ﬁrst back up data on the port the

host group belongs to. The operation for changing the host mode should not be destructive, but data

integrity cannot be guaranteed without a backup.

1. Start LUN Manager. The LUN Manager pane (Figure 14)appears.

2. In the tree, right-click the host group, and select Change Host Group.TheChangeHostGroup

dialog box appears.

Figure 47 Change Host Group dialog box

3. To change the name of the host group, enter a new name in the Group Name box.

To change the host mode (Table 16), select the new host mode from the Host Mode list.

4. If necessary, click Option, and select host mode options. For more information about host mode

options, see Table 17.

HP StorageWorks LUN Conﬁguration and Security Manager XP user guide for the

XP12000/XP10000/SVS200