SVS200 LUN Manager and Volume Manager (T1714-96015, October 2007)

Figure 53 Cha

nge iSCSI name & Nickname pane

4. To change the iSCSI name, enter a new iSCSI name or select another iSCSI name in the iSCSI

name list.

To change the

nickname, enter a new nickname in the Nickname box.

5. If necessar

y, select Apply this change to other ports, too.

If this chec

k box is selected, the change in the pane also affects other ports. For example, suppose

the same host bus adapter (that is, the same iSCSI name) is located below ports CL1-A and CL2-A in

the tree. If you select the host bus adapter (or iSCSI name) from below one of the ports and change

the nickna

me to hba1, the host bus adapter below the other port is also renamed to hba1.

NOTE:

The change

inthepanedoes

not

affect any port that satisﬁes one of the following conditions:

• The resulting nickname is already used as the nickname of a host bus adapter

connected to the iSCSI target.

•Theresult

ing iSCSI name exists in the port.

6. Click OK.Ifaconﬁrmation message appears, click OK. Changes appear in blue in the tree.

NOTE:

If you select Apply this change to other ports, too and click OK, a pane appears

(Figure 54) listing the host bus adapters to be changed. To make changes, click OK.

If not, click Cancel.

HP StorageWorks LUN Conﬁguration and Security Manager XP user guide for the

XP12000/XP10000/SVS200