SVS200 (T1714-96008, June 2006)

LUN Configuration and Security Manager XP user guide for the XP12000/XP10000/SVS200 101

Making settings on iSCSI ports and iSNS servers

Use the Port pane (Figure 22) to configure iSCSI ports in the array. You can also use this pane to make

settings on iSNS servers and modify settings when the system is operating.

Making settings on iSCSI ports

1. Start LUN Manager, and display the Port pane (Figure 22).

2. In the Package tree, select the iSCSI folder. The Port table displays a list of iSCSI ports in the array.

NOTE: If you specify a channel adapter in the Package tree, the Port table displays only ports in

the specified channel adapter.

3. In the Port table or Select a Port list, select an iSCSI port. The iSCSI port’s current configuration

appears below the Select a Port list.

4. To make settings on the iSCSI port, edit items below the list. For more information about the items, see

”iSCSI port and iSNS server settings” on page 42.

NOTE: Use the vertical scroll bar to view all items.

5. Click Set. A confirmation message appears.

6. Click OK. Settings are applied to the Port table, but not to the array. Changes appear in blue.

7. Click Apply. A confirmation message appears.

8. Click OK. Settings are applied to the array.

Making settings on iSNS servers

You can register iSCSI ports to the iSNS server by clicking Register or delete iSCSI ports from the iSNS

server by clicking Delete.

1. Start LUN Manager, and display the Port pane (Figure 22).

2. In the iSCSI Function box, click Register or Delete. The Register Ports to iSNS Server or Delete Ports

from ISNS Server pane appears.

Figure 57 Register Ports to iSNS Server pane