SVS200 (T1714-96008, June 2006)

LUN Configuration and Security Manager XP user guide for the XP12000/XP10000/SVS200 115

3. In the Authentication information (Host) list, right-click the user information item you want to delete,

and select Delete User Information (Host). The Delete Authentication Information pane appears.

Figure 73 Delete Authentication Information pane

4. Click OK.

5. Click Apply. A confirmation message appears.

6. Click OK. Settings are applied to the array.

Specifying an iSCSI target’s user information (when performing mutual

authentication)

To perform mutual authentication, you must specify user information for iSCSI targets on the array’s ports.

Specify unique user information for each iSCSI target. You can change the specified user information for

iSCSI targets the same way you specified them initially.

1. Start LUN Manager, and display the Authentication pane (Figure 30).

2. In the Port tree, select the port or iSCSI target whose user information you want to specify. The

currently registered user information for the selected port or iSCSI target appears in the Authentication

information (Target) list.

3. Right-click any point in the Authentication information (Target) list, and select Specify Authentication

Information. The Specify Authentication Information pane appears.

Figure 74 Specify Authentication Information pane

Specify the following user information for the port or iSCSI target selected in the Port tree:

• Target Name: Selected port’s iSCSI name. You cannot change the iSCSI name.