HP StorageWorks LUN Configuration and Security Manager XP user guide for the XP12000/XP10000/SVS200 (T1714-96008, June 2006)

146 Volume Manager operations
Buttons
• Add: Moves the selected LDEV from the Free LDEVs table to the Expanded LDEVs list.
• Delete: Move the selected LDEV from the Expanded LDEVs list to the Free LDEVs table.
• Set: Creates a LUSE volume consisting of the volumes currently in the Expanded LDEVs list. The new
LUSE appears in blue bold italics on the LDEV Information table, but is not actually created until you
click Apply.
• Apply: Implements settings on the array.
• Cancel: Cancels settings.
Volume Manager operations shortcut menu
When you right-click one of the LDEVs in the LDEV Information table on the Volume Manager pane, a
shortcut menu listing commands for Volume Manager operations appears.
Figure 87 Volume Manager operations shortcut menu
• Set LUSE Volume
Displays the Set LUSE confirmation pane (Figure 88). You can confirm whether or not you want to
continue the operation to create a LUSE volume. For more information, see ”Creating LUSE volumes”
on page 151.
• Release LUSE Volume
Displays the Release LUSE confirmation pane (Figure 89). You can confirm whether or not you want to
continue the operation to release a LUSE volume. For more information, see ”Releasing LUSE volumes”
on page 153.
• Reset LUSE Volume
Displays the Reset LUSE confirmation pane (Figure 90). You can confirm whether or not you want to
continue the operation to release an unregistered LUSE volume. For more information, see Resetting
unregistered LUSE volumes, page 154.
• Concatenation List
Displays the Concatenation List pane (Figure 91). For more information, see ”Viewing concatenated
parity groups” on page 151.