HP StorageWorks LUN Configuration and Security Manager XP user guide for the XP12000/XP10000/SVS200 (T1714-96008, June 2006)

LUN Configuration and Security Manager XP user guide for the XP12000/XP10000/SVS200 157
The following icons indicate the LDEV’s status.
• Emulation: Emulation type.
• Capacity: Volume’s capacity displayed in the unit selected from the Capacity Unit list.
• Paths: Number of LU paths. Blank indicates no LU paths.
• Access Attribute: Volume’s access attribute.
• Status: Volume’s status. You must click LDEV Status to display the volume’s status.
• Attribute: Volume’s attribute.
Progress bar
Displays the operation’s progress.
Buttons
• LDEV Status: Displays the current volume status.
Table 35 LDEV status icons
Icon LDEV status
Normal LDEV
LUSE volume
LDEV reserved for Auto LUN XP
CVS volume
CVS volume reserved for Auto LUN XP
Free space
LDEV secured by Hitachi SANtinel - S/390®
Remote command device
Table 36 Volume status
Status Description
Normal Volume is in a normal status.
Blocked Volume is in a blocked status. Hosts cannot access the blocked volume.
Warning Volume has a problem.
Format Volume is being formatted.
Correction Access Volume’s access attribute is being changed.
Copying Volume’s data is being copied.
Read Only Hosts can only read the volume. Hosts cannot write data to a volume in Read Only
status.
Shredding Shredding operation is in progress.
Unknown System does not recognize the volume’s status.
Table 37 Volume attributes
Attribute Description
Pool (pool-id) Volume is a pool volume (pool-VOL). The pool ID is enclosed by parentheses.
JNL Volume Volume is a journal volume.