SVS200 (T1714-96008, June 2006)

158 Custom Volume Size operations

• Shredding Param: Displays the Shredding Param (Parameter) pane. You can define shredding settings

in the Shredding Param pane.

• Download: Downloads the file containing Shredding operation results.

• Apply: Implements settings made in this pane.

• Cancel: Cancels settings made in this pane.

Volume to Space Confirmation pane

This pane appears before the Volume to Space function starts. Confirm the volumes you want to initialize

to spaces.

NOTE: An error occurs if volumes selected as targets of the Volume to Space function include a volume

that cannot be processed by the Volume to Space function (see ”Volume Manager guidelines” on

page 128).

Figure 93 Volume to Space Confirmation pane

• VDEV information table: Displays information about volumes that will be converted to space areas.

• VDEV: Set of a disk group, parity group, and VDEV number.

NOTE: If a VDEV number starts with E (for example, E1-1-(1)), the parity group consists of one or

more external LUs.

• CU:LDEV: CU and LDEV numbers.

NOTE: If an LDEV number ends with # (for example, 00:01#), the LDEV is an external LU. For

more information about external LUs, see the HP StorageWorks External Storage XP user guide.

• Emulation: LDEV’s emulation type.

• Capacity: Volume capacity in the unit selected from the Capacity Unit list in the Customized Volume

pane (Figure 92).

• OK: Registers information about volumes in the setting list as data for the Volume to Space operation.

• Cancel: Cancels the Volume to Space operation.

Install CV pane (1)

Use this pane to define and install one or more CVS volumes under an existing volume. You can specify

the emulation type and capacity of the CVS volume you want to create.

NOTE: Different panes are used for OPEN-V and other emulation types (see ”Install CV pane (1) for

OPEN-V” on page 159 and ”Install CV pane (1) for other than OPEN-V” on page 160).