SVS200 (T1714-96008, June 2006)

LUN Configuration and Security Manager XP user guide for the XP12000/XP10000/SVS200 159

Install CV pane (1) for OPEN-V

Figure 94 shows the first Install CV pane that appears when the selected emulation type is OPEN-V.

Figure 94 Install CV pane (1) for OPEN-V

The Install CV pane (1) has the following features:

• Parity Group: Selected free space’s VDEV number. The VDEV number indicates the parity group where

the VDEV belongs. For example, if VDEV number 1-1-(1) appears, the VDEV belongs to parity group

number 1-1.

NOTE: If a VDEV number starts with E (for example, E1-1-(1)), the VDEV belongs to a parity group

that consists of one or more external LUs.

NOTE: If a VDEV number starts with V (for example, V1-1-(1)), the VDEV belongs to a parity

group that consists of one or more virtual volumes (V-VOLs).

• Emulation: CVS volume’s emulation type (OPEN-V).

• LDEV information table: Displays the following information about the CVS volume settings:

• No.: CVS volume’s setting number.

• Emulation: CVS volume’s emulation type (OPEN-V).

• Capacity: CVS volume’s capacity displayed in the unit selected from the Capacity Unit list.

• available LDEVs: Number of LDEVs that can be created in the VDEV. The maximum is 512 LDEVs for

RAID5 (7D+1P) or RAID6 (6D+2P), and 256 LDEVs for other RAID levels.

• Capacity Unit: Unit the CVS volume’s capacity is displayed in.

• MB: Megabytes (MB). This unit is used for specifying the capacity of open-system volumes.

• Cyl: Cylinders (Cyl). This unit is used for specifying the capacity of mainframe volumes.

NOTE: This unit can also be used for specifying the capacity of OPEN-V volumes.

• Block: Blocks. This unit is used for specifying the capacity of external LUs. For more information

about external LUs, see the HP StorageWorks External Storage XP user guide.