SVS200 (T1714-96008, June 2006)

160 Custom Volume Size operations

• Specify capacity and number: Capacity and number of CVs in the CVS volume you want to create.

• Capacity: CVS volume’s capacity in the unit selected in the Capacity Unit list. The available

capacity range (minimum - maximum) is shown on the right (for example, 46 - 6720 MB,

50 - 7168 Cyl, or 315 - 8513 blocks). The value can be incremented by 1 MB, cylinder, or block.

• Number: Number of volumes of that size. The available range is shown on the right (for example,

1- 489).

• Divide free space by number: Used to create CVS volumes by specifying the number of CVs in the CVS

volume to be created.

• Number: Number of CVs in the CVS volume. If you select this option, the available range is shown

on the right (for example, 1-47).

• Divide free space by capacity: Used to create CVS volumes by specifying the capacity of CVs in the

CVS volume to be created.

• Capacity: Capacity of the CVS volumes to be created. The available capacity range (minimum -

maximum) is shown below Capacity (for example, 46 - 6720 MB, 50 - 7168 Cyl, or

315 - 8513 blocks).

• Set remaining space as volume: Used to create a CVS volume using the remaining space in the VDEV.

• Set: Displays the selected settings in the LDEV information table on the left.

• Delete: Deletes the settings for CVS volumes selected in the LDEV information table.

• Clear: Deletes all the settings in the LDEV information table.

• Next: Displays the Install CV pane (2).

• Cancel: Cancels the selected settings, and returns to the Customized Volume pane.

Install CV pane (1) for other than OPEN-V

Figure 95 shows the Install CV pane (1) for emulation types other than OPEN-V.

Figure 95 Install CV pane (1) for other than OPEN-V

This pane has the following features:

• Parity Group: Selected free space’s VDEV number.