SVS200 (T1714-96008, June 2006)

LUN Configuration and Security Manager XP user guide for the XP12000/XP10000/SVS200 165

NOTE: You cannot enter a number in the Input SSID list when the SSID number of another SLPR is

used check box is cleared.

• Set: Sets the SSID you select or enter in the Input SSID list to the table. The Set SSID table displays the

new SSID.

• Back: Returns to Install CV pane (2).

• Next: Opens the Install CV pane (4) (confirmation pane).

• Cancel: Cancels the SSID setting, and returns to the Customized Volume pane.

Install CV pane (4)

Use this pane to confirm the settings of the CVS volumes to be created.

Figure 98 Install CV pane (4) for confirming Install CV settings

• CVS volume setting information table: Displays a list of CVS volumes to be created.

• VDEV: VDEV number for the CVS volume to be created.

NOTE: If a VDEV number starts with E (for example, E1-1-(1)), the VDEV belongs to a parity group

that consists of one or more external LUs.

NOTE: If a VDEV number starts with V (for example, V1-1-(1)), the VDEV belongs to a parity

group that consists of one or more virtual volumes (V-VOLs).

• Emulation: Emulation type of the CVS volume to be created.

• Capacity: CVS volume’s capacity displayed in the unit selected from the Capacity Unit list in the

Install CV pane (1).

• CU:LDEV: CU:LDEV number of the CVS volume to be created.

NOTE: If an LDEV number ends with # (for example, 00:01#), the LDEV is an external LU. For

more information about external LUs, see the HP StorageWorks External Storage XP user guide.