SVS200 (T1714-96008, June 2006)

LUN Configuration and Security Manager XP user guide for the XP12000/XP10000/SVS200 171

• Clear: Removes a CU:LDEV number that is already assigned. To remove a CU:LDEV number, right-click

a CVS volume number corresponding to the CU:LDEV number you want to remove, and select Clear.

Make Volume pane (3)

This pane appears when you create CVS volumes if the selected LDEV number’s boundary area does not

have an SSID. You can set an SSID on the Make Volume pane (3).

Figure 102 Make Volume pane (3) for setting SSIDs

This pane has the following features:

• Set SSID information tree: Displays a hierarchical structure of SSID setting information that contains CU

numbers (for example, CU 00), SSID boundary areas (for example, 00-3F), and SSID (for example,

0004). When the selected LDEV number’s SSID boundary area has no SSID, the following icon

appears before the related CU number and the related LDEV boundary area. The SSID of the

boundary area having no SSID is ----.

• Set SSID table: Used set the SSID boundary area.

• CU: CU number containing an LDEV boundary with no SSID.

• LDEV Boundary: Boundary area of an LDEV number with no SSID.

• SSID: Specified SSID. The default is blank.

• Input SSID: Used to select or enter the SSID. You can enter the SSID only when you log in as a storage

administrator.

• SSID number of another SLPR is used: When selected, you can select the number of an SSID that does

not exist in the SLPR to which the parity group does not belong. When cleared, you can select only the

number of an SSID in the SLPR to which the parity group belongs.

Table 40 Set SSID tree icons (Make Volume)

Icon Description

CU number is not extracted.

CU number is extracted.

LDEV boundary area.