SVS200 (T1714-96008, June 2006)

LUN Configuration and Security Manager XP user guide for the XP12000/XP10000/SVS200 173

• CU:LDEV: CU:LDEV number of the CVS volume to be created.

NOTE: If an LDEV number ends with # (for example, 00:01#), the LDEV is an external LU. For

more information about external LUs, see the HP StorageWorks External Storage XP user guide.

NOTE: If an LDEV number ends with V (for example, 00:00V), the LDEV is a virtual volume

(V-VOL). For more information about virtual volumes, see the HP StorageWorks Snapshot XP user

guide.

• Back: Returns to the Make Volume pane (2) or Make Volume pane (3).

• OK: Registers the Make Volume settings, and returns to the Customized Volume pane.

• Cancel: Cancels the Make Volume settings, and returns to the Customized Volume pane.

Volume Initialize pane (1)

Use this pane to initialize CVS volumes other than OPEN-V.

Figure 104 Volume Initialize pane (1)

This pane has the following features:

• Normal volume-setting information table: On the upper right of the pane, displays detailed information

about the CVS volumes to be initialized.

• Parity Group: Number of the VDEV to be initialized. The VDEV number indicates the parity group

where the VDEV belongs. For example, if VDEV number 1-1-(1) appears, the VDEV belongs to

parity group number 1-1.

NOTE: If a VDEV number starts with E (for example, E1-1-(1)), the VDEV belongs to a parity group

that consists of one or more external LUs.

NOTE: If a VDEV number starts with V (for example, V1-1-(1)), the VDEV belongs to a parity

group that consists of one or more virtual volumes (V-VOLs).

• No.: Setting number of the CVS volume to be initialized.

• Emulation: Emulation type of the CVS volume to be initialized.