SVS200 (T1714-96008, June 2006)

LUN Configuration and Security Manager XP user guide for the XP12000/XP10000/SVS200 175

Volume Initialize pane (2)

This pane appears during the initialization of CVS volumes if the selected LDEV number’s boundary area

does not have an SSID. You can set an SSID on the Volume Initialize pane (2).

Figure 105 Volume Initialize pane (2) for setting SSIDs

This pane has the following features:

• Set SSID tree: Displays a hierarchical structure of SSID setting information containing CU numbers (for

example, CU 00), SSID boundary areas (for example, 00-3F), and SSID (for example, 0004). When a

selected LDEV number’s SSID boundary area has no SSID, the following icon appears before the

related CU number and LDEV boundary area. The SSID of a boundary area having no SSID is ----.

• Set SSID table: Used to set the SSID boundary area.

• CU: CU number containing an LDEV boundary with no SSID.

• LDEV Boundary: Boundary area of an LDEV number with no SSID.

• SSID: Specified SSID. The default is blank.

• Input SSID: Used to select or enter the SSID. You can enter the SSID only when you log in as a storage

administrator.

• SSID number of another SLPR is used: When selected, you can select the number of an SSID that does

not exist in the SLPR to which the parity group does not belong. When cleared, you can select only the

number of the SSID in the SLPR to which the parity group belongs.

NOTE: The SSID number of another SLPR is used check box appears only when you log in as a

storage administrator and when there are two or more SLPRs.

Table 41 Set SSID tree icons (Volume Initialize)

Icon Description

CU number is not extracted.

CU number is extracted.

LDEV boundary area.