SVS200 (T1714-96008, June 2006)

176 Custom Volume Size operations

NOTE: You cannot enter the number in the Input SSID list when the SSID number of another SLPR

is used check box is cleared.

• Set: Sets the SSID you select or enter in the Input SSID list to the Set SSID table. The Set SSID table

displays the new SSID.

• Back: Cancels the SSID setting, and returns to the Volume Initialize pane (1).

• Next: Opens the Volume Initialize pane (3) (confirmation pane).

• Cancel: Returns to the Customized Volume pane.

Volume Initialize pane (3)

Use this pane to confirm the settings of the CVS volumes to be initialized.

Figure 106 Volume Initialize pane (3) for confirming Volume Initialize settings

This pane has the following features:

• CVS volume-setting information table: Displays a list of the CVS volumes to be initialized.

• VDEV: VDEV number for the CVS volume to be initialized.

NOTE: If a VDEV number starts with E (for example, E1-1-(1)), the VDEV belongs to a parity group

that consists of one or more external LUs.

NOTE: If a VDEV number starts with V (for example, V1-1-(1)), the VDEV belongs to a parity

group that consists of one or more virtual volumes (V-VOLs).

• Emulation: Emulation type of the CVS volume to be initialized.

• Capacity: Capacity of the CVS volume to be initialized, either in MB for open-system volumes or

cylinders (Cyl) for mainframe volumes.

• CU:LDEV: CU:LDEV number of the CVS volume to be initialized.