SVS200 (T1714-96008, June 2006)

56 LUN Manager panes

Figure 15 LUN Manager pane (icon under iSCSI folder selected)

LU Path tree

Use this tree to find information about LU paths. When you select a host group from this tree, the table on

the right displays information about LU paths associated with the selected host group.

The Subsystem folder is located at the top of the tree. The Fibre, NAS, and iSCSI folders appear below the

Subsystem folder.

Fibre folder

If you double-click the Fibre folder, Fibre Channel ports in the array appear as icons. The port name, port

address, LUN security status, and port attribute (that is, whether the port is an initiator, target, RCU target,

or external port) appear on the right of each icon.

NOTE: The Fibre folder does not appear if the array does not contain any Fibre Channel adapters.

Figure 16 Fibre folder

Table 7 Fibre Channel port icons

Icon Status

Port in Standard mode. LUN security is disabled on the port.

Port in Standard mode. LUN security is enabled on the port.

Port in High Speed mode. LUN security is disabled on the port.