SVS200 (T1714-96008, June 2006)

58 LUN Manager panes

The group number (G-ID) of this host group is 00.

• User: When selected, information about paths to user LUs appears in the list on the right.

The group number (G-ID) of this host group is 01.

iSCSI folder

If you double-click the iSCSI folder, iSCSI ports in the array appear as icons. The port name and attribute

appear on the right of each icon.

NOTE:

• The iSCSI folder does not appear if the array does not contain iSCSI channel adapters.

• iSCSI ports always have the Target attribute.

Figure 18 iSCSI folder

When you double-click an iSCSI port in the tree, a list of iSCSI targets ( ) appears. The iSCSI target’s

group number (G-ID), name, and host mode appear on the right of this icon. For more information about

host modes, see Table 16 on page 77.

When you double-click an iSCSI target in the tree, a list of host bus adapters ( )appears. The host bus

adapter’s nickname and iSCSI name appear on the right of this icon.

NOTE: Host bus adapters are adapters contained in host computers and are used as ports for

connecting hosts and the array.

When you double-click a port to which LUN security is not applied to display a list of iSCSI targets, iSCSI

targets except for the first group (that is, iSCSI target 0) are grayed out.

LU Path table

A table appears on the right side and displays LU path information about the host group selected in the

tree.

Table 9 iSCSI port icons

Icon Status

LUN security is not applied to the port.

LUN security is applied to the port