SVS200 (T1714-96008, June 2006)

62 LUN Manager panes

NOTE: If you select an item related to Fibre Channel or NAS ports, you cannot use the Add iSCSI

name button.

• Add LU Path: Defines LU paths to logical volumes. Before using this button, you must select LUNs in the

LU Path tree and select logical volumes in the LDEV table.

• Apply: Applies settings in the pane to the array.

• Cancel: Cancels settings in the pane.

Port pane

When you click the icon in the Command View XP or XP Remote Web Console main pane, LUN

Manager starts. LUN Manager includes the Port pane, which you use to make settings for Fibre Channel

and iSCSI ports. Also, in NAS environments, you can operate the NAS channel adapter’s OS from the

Port pane.

The content of the Port pane changes depending on the selection in the Package tree. If you select an icon

under the Fibre folder, Figure 21 appears. If you select an icon under the iSCSI folder, Figure 22 appears.

If you select an icon under the NAS folder, Figure 23 appears.

NOTE: Storage partition administrators can display ports and operate only within the allocated SLPR.

For more information about SLPRs, see the HP StorageWorks XP Disk/Cache Partition user guide.

Figure 21 Port pane (icon under Fibre folder selected)