SVS200 (T1714-96008, June 2006)

68 LUN Manager panes

The CHN list displays all NAS channel adapters. When you select a channel adapter in the Package tree,

the CHN list displays information of the selected channel adapter. Information displayed in the CHN list is

shown in Figure 29.

Figure 29 CHN list (NAS channel adapters)

• CHN Name: NAS channel adapter’s name.

• OS Status: Running status of the NAS channel adapter’s OS. Statuses are:

• NEW: OS is not installed on the channel adapter or is being installed.

• UP: OS is started.

• DOWN: OS stopped normally.

• DOWN (Failure): OS stopped due to a failure.

• BUSY (Boot): OS is being started.

• BUSY (Shutdown): OS is being stopped.

• ERROR: OS is being stopped due to a failure.

• DUMP: Hibernation dump is being collected.

• DUMP SKIP: Hibernation dump collection is skipped.

• HUNG UP: OS is freezing.

• UNKNOWN: OS status collection failed.

If the status is UP, you can use LUN Manager to stop the OS. If the status is DOWN or DOWN

(Failure), you can use LUN Manager to start the OS.

• Setting: Specified operation for the channel adapter’s OS. This column is blank before specifying an

operation. After specifying an operation, Reboot, Boot, or Shut Down appears. If you click Apply, this

column returns to a blank.

Buttons

• Apply: Applies settings in the pane to the array.

• Cancel: Cancels settings in the pane.

• Reboot: Appears when select an icon under the NAS folder in the Package tree. Restarts an OS in UP

status selected in the CHN list.

• Shut Down: Appears when you select an icon under the NAS folder in the Package tree. Stops an OS

in UP status selected in the CHN list.

• Boot: Appears when you select an icon under the NAS folder in the Package tree. Starts an OS in

DOWN or DOWN (Failure) status selected in the CHN list.

Authentication pane

When you click the icon in the Command View XP or XP Remote Web Console main pane, LUN

Manager starts. The LUN Manager pane includes the Authentication pane, which you can use to make