SVS200 (T1714-96008, June 2006)

72 LUN Manager panes

• Time out: Period of time between authentication sessions to the same port. If the previous

authentication session to a port failed, the next authentication session starts after the specified period

of time elapses. The unit is seconds.

• Refusal Intvl.: If authentication fails for the number of times specified in Refusal Freq., connection to the

port fails. Refusal Intvl. is the interval from when connection to a port fails to when the next

authentication session starts. The unit is minutes.

• Refusal Freq.: Number of times of authentication for connecting to a port is allowed. If authentication

fails for the specified number of times, connection to the port fails.

FC Switch Information list

• Port Name: Fibre Channel port name. For more information, see Table 3, Table 4, Table 5, and

Table 6.

• User Name: Fibre Channel switch’s user name.

• Mode: Mode of authentication between ports and Fibre Channel switches. If the authentication mode

is mutual, bi-directional appears. If the authentication mode is not mutual, unidirectional appears.

• Authentication: Specifies if authentication for the Fibre Channel switch is performed. If the Fibre

Channel switch is a target of user authentication, Enable appears. If the host is not a target of user

authentication, Disable appears.

Authentication information (Target) list

Fibre folder

Displays user information for host groups allowed to connect to the port or host group selected in the tree.

• Group Name: Host group name.

• User Name: Host group’s user name. When a user name is not defined for a host group, this column is

blank.

• Authentication: Specifies if authentication for the host is performed. If the host is a target of user

authentication, Enable appears. If the host is not a target of user authentication, Disable appears.

iSCSI folder

Displays user information for iSCSI targets allowed to connect to the port or iSCSI target selected in the

tree.

• Target Name: iSCSI target’s iSCSI name.

• User Name: iSCSI target’s user name. When a user name is not defined for an iSCSI target, this

column is blank.

• Authentication: Indicates whether authentication of the host is performed. If the host is a target of user

authentication, Enable appears. If the host is not a target of user authentication, Disable appears.

Authentication Information (Host) list

Fibre folder

Displays host user information for the port or host group selected in the tree.

In this list, you can register up to 64 user information items.

• Group Name: Host group name.

• User Name: Host’s user names. When a user name is not defined for a host, this column is blank.

• Protocol: Protocol used in the user authentication.

iSCSI folder

Displays host user information for the port or iSCSI target selected in the tree.

In this list, you can register up to 64 user information items.

• Target Name: Host bus adapter’s iSCSI name.

• User Name: Host’s user name. When a user name is not defined for a host, this column is blank.

• Protocol: Protocol used in the user authentication.