SVS200 (T1714-96008, June 2006)

76 LUN Manager operations

group for Windows hosts. Next, you must register HP-UX hosts to the corresponding host group and

The following procedure describes how to create host groups. The procedure for registering hosts to a

host group is described in ”Registering hosts in host groups” on page 79.

1. Start LUN Manager. The LUN Manager pane (Figure 14) appears.

2. Right-click the port for which you want to create a host group, and select Add New Host Group. The

Add New Host Group pane appears.

NOTE: If you right-click an initiator port, you cannot select Add New Host Group. You cannot

create host groups for initiator ports.

Figure 35 Add New Host Group pane

3. In the Group Name box, enter the host group name.

It is convenient if you name each host group after the host platform. For example, when creating a host

group to register Windows NT® hosts in, the host group name can be wnt.

A host group name can consist of up to 32 ASCII characters (letters, numerals, and symbols).

However, you cannot use the following symbols for host group names:

\/:,;*?"<>|

You cannot use spaces for the first and last characters in host group names.

Host group names are case-sensitive. For example, host group names wnt and Wnt represent different

host groups.

4. In the Host Mode list, select a host mode. When selecting a host mode, you must consider the platform

and other factors (see Table 16).

CAUTION: Do not select Reserve from the list. Reserve indicates that the host mode is not currently

supported.

5. If necessary, click Option, and select the host mode options. For more information about host mode

options, see Table 17 on page 77.

Figure 36 Add New Host Group pane (Option selected)