HP StorageWorks LUN Configuration and Security Manager XP user guide for the XP12000/XP10000/SVS200 (T1714-96008, June 2006)

LUN Configuration and Security Manager XP user guide for the XP12000/XP10000/SVS200 91
• The resulting iSCSI name exists in the port.
6. Click OK. If a confirmation message appears, click OK. Changes appear in blue in the tree.
NOTE: If you select Apply this change to other ports, too and click OK, a pane appears
(Figure 54) listing the host bus adapters to be changed. To make changes, click OK. If not, click
Cancel.
Figure 54 Check iSCSI names dialog box
7. Click Apply. A confirmation message appears.
8. Click OK. Changes are applied to the array.
Deleting host bus adapters from host groups
NOTE: You cannot perform this operation on host groups for NAS ports.
1. Start LUN Manager. The LUN Manager pane (Figure 14) appears.
2. In the tree, right-click a host bus adapter ( ), and select Delete WWN. A confirmation message
appears.
3. Click Yes.
4. Click Apply. A confirmation message appears.
5. Click OK. Settings are applied to the array.
Deleting host bus adapters from iSCSI targets
NOTE: You cannot perform this operation on host groups for NAS ports.
1. Start LUN Manager. The LUN Manager pane (Figure 15) appears.
2. In the tree, right-click a host bus adapter ( ), and select Delete iSCSI Name. A confirmation message
appears.
3. Click YES.
4. Click Apply. A confirmation message appears.
5. Click OK. Settings are applied to the array.