HP Insight Orchestration 6.0 User Guide

HP Management Agents for RHEL 5 x64. For Direct-Attached Storage (DAS) OS deployment, do NOT
include the Deploy ProLiant System Configuration (BL BFS) job in the job folder.
5. To create a job folder for each required operating system, repeat this procedure.
6. To enable adding computers to the domain during provisioning, configure the Insight Control server
deployment domain authorization using Tools→Options→Domain Accounts.
Enclosures are discovered by Systems Insight Manager through the iLO IP address of the enclosure. Be
sure to use the iLO credentials of the Onboard Administrator enclosure as the WBEM credentials.
7. In HP Insight Dynamics, create storage pool entries for automated SAN boot provisioning. You must
know the storage array port WWN/LUN (World Wide Name/Logical Unit Number) when creating
the entries. If you do not know these settings, you can modify them after creating storage LUNs and
zones. See “Creating SAN-backed storage”.
8. Manually configure storage LUN presentation and zoning using the virtual HBA WWN in VC profiles
used when creating the storage pool entries. HP recommends creating a spreadsheet to track storage
mapping.
During provisioning, the server blade should see a SAN volume when booting. If it does not, check your
storage configuration settings.
Modifying the Erase ProLiant Hardware job
After installing HP Insight Rapid Deployment software (RDP), you must modify the default Erase ProLiant
Hardware job. To modify the job, do the following:
16 Configuration