HP Integrity Virtual Server Manager 6.2 User Guide
Table Of Contents
- HP Integrity Virtual Server Manager 6.2 User Guide
- Contents
- 1 Introduction
- 2 Installing Integrity Virtual Server Manager
- 3 Accessing and Navigating Integrity Virtual Server Manager
- 4 Using Integrity Virtual Server Manager views and tabs
- 5 Using Integrity Virtual Server Manager menus
- 6 Working with VMs or vPars
- Working with VMs
- Planning VMs
- Creating VMs
- Modifying VMs
- Starting VMs
- Stopping VMs
- Restarting VMs
- Deleting VMs
- Migrating VMs
- Suspending VMs
- Resuming VMs
- Moving suspend files
- Creating virtual switches
- Starting, stopping, and deleting virtual switches
- Deleting network or storage devices
- Opening iLO console
- Opening virtual iLO remote console
- Deleting virtual iLO remote console
- Deleting DIOs
- Adding DIOs
- Replacing DIO H/W path
- Replacing DIO MAC address
- Working with vPars
- Creating vPars
- Modifying vPars
- Booting vPars
- Stopping vPars
- Resetting vPars
- Creating virtual switches
- Starting, stopping, and deleting virtual switches
- Deleting network or storage devices
- Deleting vPars
- Opening iLO console
- Opening virtual iLO remote console
- Deleting virtual iLO remote console
- Adding DIOs
- Replacing DIO H/W path
- Replacing DIO MAC address
- Deleting DIOs
- Working with VMs
- 7 Collecting and viewing utilization data
- 8 Viewing logs and version information
- 9 Support and other resources
- Information to collect before contacting HP
- How to contact HP
- Security bulletin and alert policy for non-HP owned software components
- Subscription service
- Registering for software technical support and update service
- How to use your software technical support and update
- HP authorized resellers
- New and changed information in this edition
- Related information
- Typographic conventions
- 10 Documentation feedback
- A Error messages, status indicators, and troubleshooting
- Glossary
- Index
Figure 35 DIO Pool tab — HPVM DIO table
You must the DIO check box in the HPVM DIO table to enable Change Label and Change Owner.
Click Change Label to change the label of the DIO. For more information, see “Changing the labels
of HPVM DIOs” (page 59).
Click Change Owner to change the owner of the DIO to host. For more information, see “Changing
the owner of HPVM DIOs to host” (page 59).
Column descriptions
Table 5 describes the parameters listed for host DIO resources and Table 6 describes the parameters
listed for HPVM DIO resources.
nl
Table 5 Show host DIO resources
DescriptionName
Indicates the functions of a device. For example, a function
H/W path 0/0/0/3/0/0/0 indicates function 0, which
is the last number of the H/W path. Therefore,
0/0/0/3/0/0/[0–N] are all functions of the same device
0/0/0/3/0/0.
H/W Path
Indicates the LAN ID through which the host VM or vPar is
connected to the network.
LAN Interface
Indicates the status (Up or Down) of the LAN interface. The
status is Up if the interface is operational, and Down if it
is not operational.
Status
54 Using Integrity Virtual Server Manager views and tabs