HP Matrix Operating Environment 7.2 Update 1 Infrastructure Orchestration User Guide

5. To create a job folder for each required operating system, repeat steps 1 through 4.
6. To enable adding computers to the domain during provisioning, configure the Insight Control
server deployment domain authorization using Tools→Options→Domain Accounts.
Enclosures are discovered by Systems Insight Manager through the iLO IP address of the
enclosure. Be sure to use the iLO credentials of the Onboard Administrator enclosure as the
WBEM credentials.
7. In Matrix Operating Environment, create storage pool entries for automated SAN boot
provisioning. It's important to know the storage array port WWN/LUN (World Wide
Name/Logical Unit Number) when creating the entries. If these settings are unknown, modify
them after creating storage LUNs and zones. See “Manually creating SAN-backed storage
in Matrix OE visualization” (page 148).
8. Manually configure storage LUN presentation and zoning using the virtual HBA WWN in VC
profiles used when creating the storage pool entries. HP recommends creating a spreadsheet
to track storage mapping.
NOTE: Together with HP Storage Provisioning Manager, Matrix infrastructure orchestration
can automate this process. With the help of SPM, Matrix infrastructure orchestration can carve
a boot volume, do the LUN presentation, and perform the zoning. The storage arrays, storage
pools, volumes, and SAN networks are managed by SPM in order to automate this process
through infrastructure orchestration. For more information, see the Faster storage provisioning
in the HP Matrix Operating Environment whitepaper at http://www.hp.com/go/matrixoe/
docs.
During provisioning, the server blade should see a SAN volume when booting. If it does not, check
the storage configuration settings.
Modifying the Erase ProLiant Hardware job
After installing Insight Control server deployment software, modify the default Erase ProLiant
Hardware job.
Configuring deployment servers 33