HP Matrix Operating Environment 7.3 and 7.3 Update 1 Logical Server Management User Guide

There are several check boxes in the Refresh Logical Servers screen. Use the following combinations
to refresh resources.
Select...To refresh...
Virtual Connect resources
□ Virtual Connect Enterprise Manager
□ Systems Insight Manager
□ Static Servers
□ VCEM GUID Server
Virtual machine resources
□ HP Insight Control virtual machine management
□ Systems Insight Manager
Operations Orchestration resources
□ Static Servers
□ Systems Insight Manager
Reassociating logical servers is necessary after using VCEM in the following scenarios:
• You deleted and recreated a VC Domain Group using the same name.
• You have moved VC Domains with upgraded firmware to a new VC Domain Group to allow
enhanced capability
• You get an error from Virtual Connect Enterprise Manager that recommends moving a VC
Domain to a new VC Domain Group.
View logical server details
The Report→View Logical Server Details... menu selection, or clicking the logical server icon or
the non-movable (static) logical server icon in the HP Matrix OE visualization: Visualization tab,
displays the logical server definition in read only mode in a tabular view. It also displays additional
attributes of the logical server, including the logical server state and type, and whether the logical
server is inoperable.
View logical server job status
The Report→View Logical Server Job Status... menu selection shows the status and messages, if
any, of a logical server job (or operation). Multiple jobs can be in progress at any one time. Up
to 500 of the most recent jobs are displayed.
A status job is not shown if you cancel the create logical server operation, or if the create logical
server operation fails before you are asked to Save or Cancel the operation.
Creating a Virtual Connect logical server results in two status jobs: one for creating the logical
server, and one for creating the Virtual Connect profile (started when server world wide names
are allocated when you enter port information on the storage configuration screen).
NOTE: After a logical server operation is started, you can view its status on the Report→View
Logical Server Job Status... screen, but you cannot cancel it. Running jobs do not time out. If a job
seems to be running for a long period of time (more than two hours), the job may have completed
but some issues may have been encountered with the underlying software. The job will continue
to run and the logical server will be locked. The lock is released on the next restart of the Logical
Server Automation service.
22 Managing logical servers