HP Matrix Operating Environment 7.3 and 7.3 Update 1 Logical Server Management User Guide

l. When the value in the Status column is Presentation Completed, press the Modify button
on the Manage Storage Pool screen to display this screen.
m. Select a Storage Port WWN from the drop-down menu and press Save.
2. For SAN Catalog Storage Entry:
a. Click the Add Volume button on the right side of the screen to add a row to the Volume
& Path Selection table.
b. Optional: Check the Redundancy check box next to a specific volume to implement
redundancy for that volume.
c. Check the Masked check box if you want the volume to be presented to the server WWN
during boot. If this check box is unchecked, the volume is a data disk that hidden from
the server WWN during boot.
d. Enter the Size in GB for the storage volume.
e. Select a RAID Level for the storage volume.
f. If it is not selected, select the volume using the radio button selector preceding the storage
volume.
g. Press Show Candidates. The storage volumes you previously imported using HP Storage
Provisioning Manager (or which SPM can on-demand provision) that match the selected
configuration (size and RAID) are displayed in the Candidates drop-down menu. The list
of candidates will indicate if each is an existing volume of the right size, a volume to be
grown, or a new volume to be created.
h. Select a value from the Candidates drop-down menu.
i. Optional: In the Manage Server WWNs, change the Server WWN by typing in the text
box. This is useful if the SAN is prezoned and you have used LSMUTIL to reserve server
WWNs in advance. For more information, see “LSMUTIL database utility” (page 64).
j. Press Save.
k. On the Manage Storage Pool screen, monitor the Status column for the storage pool entry.
(You may have to refresh the page by pressing Get/Refresh Storage Pool Entries.)
l. When the value in the Status column is Presentation Completed, press the Modify button
on the Manage Storage Pool screen to display this screen.
m. Select a Storage Port WWN from the drop-down menu and press Save.
3. For a SAN Pre-populated Catalog Storage Entry:
a. Click the Add Volume button on the right side of the screen to add a row to the Volume
& Path Selection table.
b. Enter the Size in GB for the storage volume.
c. Select a RAID Level for the storage volume.
d. If it is not selected, select the volume using the radio button selector preceding the storage
volume.
e. Press Show Candidates. The storage volumes you previously imported using HP Storage
Provisioning Manager that match the selected configuration (size and RAID) are displayed
in the Candidates drop-down menu.
f. Select a value from the Candidates drop-down menu.
g. Select a value from the Storage Port WWN drop-down menu. The LUN box is filled in
automatically.
h. Press Save.
i. On the Manage Storage Pool screen, monitor the Status column for the storage pool entry.
(You may have to refresh the page by pressing Get/Refresh Storage Pool Entries.)
Use the radio button selector preceding the storage volume and the Remove Volume button to
remove entries from the table.
Logical server storage 57