HP Matrix Operating Environment 7.3 and 7.3 Update 1 Logical Server Management User Guide

Table 8 LSMUTIL options (continued)
DescriptionParametersOption
The parameter [names] can be the names of logical servers in
a comma separated list.
Prints a short list in ASCII format for all available, vm, vc,
or oowf storage pool entries. If the -xml parameter is supplied,
-spe [-available | -vm | -vc | -oowf]
[-details] [-xml] [-names names][-file
filename]
a long list of storage pool entries in XML form will be sent to
sysout. The following list shows what is displayed for each
parameter:
• The available parameter—Available storage pool entries
are listed.
• The vm parameter—Virtual Machine based storage pool
entries are listed.
• The vc parameter—Virtual Connect based storage pool
entries are listed.
• The oowf parameter—Operations Orchestration workflow
based storage pool entries are listed.
If the -details parameter is supplied, a detailed list of Storage
Pool Entries is displayed. This listing is best used in conjunction
with the names parameter to locate the details of a particular
SPE.
The parameter [names] can be the names of storage pool entries
in a comma separated list.
Prints a short list in ASCII format for WWNs starting with a
specified WWN (required). The following list describes the
parameters:
-wwn -startWWN wwn [-range n]
[-lsm] [-free] [-file filename]
• Range—specifies the number of WWNs to be queried
• LSM—returns only the WWNs owned by "LSA" or "LSARES"
• FREE—returns only WWNs with a status of "FREE”
Preallocate the specified WWN or preallocate initiator WWNs
for a specified Virtual Connect Domain Group. Displays the
-wwn [WWN| DomainGroupName
NumberofWWNs] –help
-reserve
reserved WWNs to standard output in ASCII format. You must
specify a Virtual Connect Domain Group name and an integer
from 1 to 100 if you enter a DomainGroupName. Either of the
following formats is acceptable:
• -reserve –wwn 08:03:24:34:AE:89:21:99
• -reserve –wwn DomainGroupName 32
If you specify more than just lsmutil –reserve –wwn, you
must specify either the DomainGroupName and the number of
WWNs to reserve, or the single WWN to reserve.
If only the -wwn parameter is supplied with the reserve option,
the available domain groups are displayed.
Deallocates the WWNs listed in the comma or semicolon
separated list.
WWNsToUnreserve-unreserve
Activates the named logical servers on the target specified. The
targetname is the Preferred System Name of the target shown
-names names -target targetname
[-force]
-activate
on the HP SIM systems page. Generally this is the name of the
host or the serial number of the blade. The parameter [names]
can be the names of logical servers in a comma separated list.
If -force is used, no verification checks are performed before
attempting the activation.
66 LSMUTIL database utility