HP Matrix Operating Environment 7.3 Update 1 Release Notes

a. From the HP Matrix Operating Environment menu, click Tools→Infrastructure

Orchestration.

b. Click the Servers tab. Make sure the servers are not being used by checking

the “Usage” column.

c. Move the servers under the “Maintenance” pool to the desired server pool by

using the “Modify Pool” option.

5. Recreate the service request.

Provisioning failure on Integrity blades BL870c i2, BL890c i2, BL870c i4,

and BL890c i4

Matrix infrastructure orchestration provisioning fails on Integrity server blades BL870c

i2, BL890c i2, BL870c i4, and BL890c i4. The

serverboot.physical.wait.seconds in the hpio.properties file and the

INTEGRITY_POWERON_WAITTIME in the lsa.properties file are not set to the

right values according to the blade models. The wait time consists of waiting for the

Integrity blade to boot completely before infrastructure orchestration or Matrix OE

logical server management executes the power off. This setting is required to prevent

the potential QLogic HBA card EFI/FW from being corrupted while the Virtual Connect

profile is being written to or removed from the NVRAM.

NOTE: The hpio.properties resides under IOinstalledDir/conf.

The lsa.properties resides under VSEinstalledDir/conf/lsa.

Suggested action

1. Measure the time required for the power cycle of the Integrity blade that is

provisioned.

NOTE: The time varies based on the blade model, its memory size, and the

number of QLogic cards. You can measure the power cycle time from the Integrity

blade remote console using OA (Onboard Administrator) or VCEM.

2. Set the serverboot.physical.wait.seconds and

INTEGRITY_POWERON_WAITTIME according to the time measured in step 1.

Use the following parameters as a minimum.

• For BL870c i2 and i4 blades:

Set the serverboot.physical.wait.seconds to 540 seconds.◦

◦ Set the INTEGRITY_POWERON_WAITTIME to 540000 milliseconds.

• For BL890c i2 and i4 blades

◦ Set the serverboot.physical.wait.seconds to 1080 seconds.

◦ Set the INTEGRITY_POWERON_WAITTIME to 1080000 milliseconds.

Limitations

IO/OO Load Balancer workflows not able to process large HAProxy configuration

requests

The Create Logical Load Balancer Groups workflow targeting the Load Balancer HAProxy

may fail with the following error message:

The execution of the workflow Create a Logical Load Balancer

Groups has failed.