HP Matrix Operating Environment 7.3 Update 1 Release Notes

VM cluster provisioning requires restart of VMware Management Agents for
preferred hostname to be registered in DDNS
The VM cluster Operations Orchestration workflows enable Dynamic DNS integration
by setting a VMware property. For this property to be activated, and the DDNS
registration performed, the management network on the ESX host must be manually
restarted.
Suggested action
After provisioning an ESXi VM cluster, if full registration in a DDNS environment is
required, restart the Management Agents on each VM host in the VMware cluster just
created using the server console. You can alternatively use the vCenter VM host context
menu to request that the host be re-booted. The fully qualified name of the host will then
be registered.
Set retry parameters for BL620c G7 and BL680c G7 blades
Matrix OE infrastructure orchestration may time out while waiting for the server to be
recognized due to long server post times, particularly when using the BL620c G7 or
the BL680c G7.
Suggested action
To avoid this issue on any server:
1. Edit C:\Program Files\HP\Matrix infrastructure orchestration\
conf\hpio.properties and set the retry.count.ares.pxe parameter to
a value greater than 30.
2. Restart the HP Matrix infrastructure orchestration service.
Some templates are not imported correctly and do not appear in Organization
tab
Occasionally, some 6.3 infrastructure orchestration templates are not imported correctly.
These templates appear in the infrastructure orchestration console Templates tab, but
do not appear in the Organization tab Service Provider resource box. As a result, the
templates cannot be assigned to an organization.
Suggested action
Open the template in infrastructure orchestration designer, and “Save As” the template.
It will then appear in the Organization tab.
After upgrade, ioexec commands require installation path
The infrastructure orchestration Windows environment default installation path was
changed from C:\Program Files\HP\Insight Orchestration to C:\Program
Files\HP\Matrix infrastructure orchestration. In a new installation of
Matrix OE 7.2 or later, the bin folder for IO is added to the DOS path, enabling you
to run ioexec commands from a command prompt in any folder on the CMS. However,
after an upgrade from Insight Dynamics 6.3 to Matrix OE 7.2 or later, ioexec
commands can be run only from the C:\Program Files\HP\Matrix
infrastructure orchestration\bin folder.
Suggested action 1
Manually enter C:\Program Files\HP\Matrix infrastructure
orchestration\bin on the command line before entering any ioexec commands.
Suggested action 2
Reboot the CMS to automatically update the IO bin folder to the DOS path.
33