HP Matrix Operating Environment 7.3 Update 1 Release Notes

Templates that connect a physical disk to an Hyper-V HA virtual server group
cannot be provisioned
Designer allows a physical disk to be connected to a High Availability Hyper-V virtual
server group and allows you to set the Raw Device Mapping Type for the physical disk.
However, provisioning a template with this configuration returns an error.
Suggested action
In infrastructure orchestration designer, delete the physical storage component and
replace it with a virtual storage component, then retry the create service operation.
Deleting the chargeback archive can cause the HPMOEMetering database
transaction log to grow very large
Using the chargeback CLI chargeback archive databasedelete command can
cause a large number of registers to be added to the transaction log, especially if the
date specified by the -d qualifier is far in the past (a year or more). If the log grows
large enough, the hard disk, on which the database is running, may run out of free
space.
Suggested action
Before executing archive databasedelete, consult with your database
administrator. If you have already executed the command, ask the administrator about
performing a shrink operation on the transaction log.
Provisioning of HP Integrity VMs with NPIV data disk fails
HP Integrity VMs with NPIV disks can be created through Matrix infrastructure
orchestration. But the disks must be added after service creation through an Add disk
operation. Any attempt to add NPIV data disks before service creation will fail and
display the error message on the IO Requests screen:
Workflow execution failed for operation type EditLS: could not
delete:
[com.hp.vse.lsa.datamodelV72.LsaFcConnection#44]
Suggested action
1. Create the service from the IO template.
2. Power off the virtual server where the NPIV data disk will be added by selecting
Power off servers from the Actions or Server Actions list in IO.
3. Add the required NPIV data disk to the virtual server by selecting Add disks from
the Actions or Server Actions list in IO.
4. Power on the virtual server by selecting Power on servers from the Actions or Server
Actions list in IO.
Insight managed system setup wizard
Limitations
Privilege elevation configuration that requires a password by the privilege elevation tool
is not supported
Insight managed system setup wizard supports privilege elevation only on a CMS that
has privilege elevation configured so that no password is required by the privilege
elevation tool (such as su and sudo). If you attempt to configure features when privilege
elevation is turned on and requires a password, you may see failures in the wizard's
execution output.
35