HP Insight Dynamics 6.0 Update 1 Release Notes

Insight Managed System Setup Wizard
Limitations
Privilege elevation configuration that requires a password by the privilege elevation tool is not
supported
Insight managed system setup wizard supports privilege elevation only on a CMS that has
privilege elevation configured so that no password is required by the privilege elevation tool
(such as su and sudo). If you attempt to configure features when privilege elevation is turned
on and requires a password, you may see failures in the wizard's execution output.
Suggested action If a feature fails to configure correctly because of privilege elevation password
requirements, configure the feature outside of the managed system setup wizard.
To turn off the requirement for a password, use the Systems Insight Manager
Options→Security→Privilege Elevation menu, and uncheck the check box labeled “A password
is required for this privilege elevation tool.” Note that systems managed by the CMS must be
reconfigured to reflect this configuration change.
HP Integrated Lights-Out 3 (iLO3) is not supported
HP Integrated Lights-Out 3 (iLO3) is not supported in the current release of Insight managed
system setup wizard. However, iLO3 is not excluded as a target. If iLO3 is used as a target, a
license will fail to be applied (the lmSetILOKey method will fail with return code 26) and Single
Sign On will not be able to configure the trust relationship with the iLO3. Neither of these issues
impacts iLO or iLO2.
Suggested action 1 Check for future versions of iLO3 firmware in which licensing will work
due to an SSH output change, and Single Sign On support will be included.
Suggested action 2 Assign licenses manually using the iLO user interface or the set command.
See the iLO documentation for more information.
Log into the iLO without using SSO.
HP Integrity rx2620 is not supported
In this release, using the Insight managed system setup wizard to configure an HP Integrity
rx2620 server is not supported.
Suggested action Manually configure HP Integrity rx2620 servers.
Major issues
Patch required to register Integrity VM hosts running Integrity VM 4.1 or higher and 11.31 HA-OE
or DC-OE
The Insight managed system setup wizard fails to register HP Integrity VM hosts running Integrity
VM 4.1 or higher and either the 11.31 High Availability Operating Environment (HA-OE) or the
11.31 Data Center Operating Environment (DC-OE).
Suggested action Apply the patch PHSS_40784 to the HP-UX 11i v3 Integrity VM host. The
patch is needed on systems where Serviceguard is installed, but the systems are not actively in
a Serviceguard cluster. Serviceguard is included with the HP-UX 11i v3 HA-OE and DC-OE.
You can download this patch from http://www13.itrc.hp.com/service/patch/mainPage.do. Select
Search by Patch IDs in the drop-down menu, then type PHSS_40784 in the search box.
Insight Managed System Setup Wizard 27