HP Insight Dynamics 6.2 Integrity CMS Installation and Configuration Guide

3 Installation
Install HP SIM and ID-VSE for Integrity using Table 3-1.
IMPORTANT: Starting with VSE Management Software version 4.0 (A.04.00.07.xx), licenses for
ID-VSE for Integrity are managed in the HP SIM License Manager database on the CMS. When
you upgrade an HP-UX CMS that has a previous version of ID-VSE for Integrity installed, any
product licenses that were previously installed or scanned are automatically migrated to the
License Manager database. For more information about migrating previous licenses to the new
license model, see vselicense(1M) and the HP Insight Dynamics 6.2 Getting Started Guide.
Overview checklist for installing ID-VSE for Integrity
Use Table 3-1 for an overview of the installation process for ID-VSE for Integrity on an HP-UX
CMS.
Table 3-1 Checklist for installing ID-VSE for Integrity on an HP-UX CMS
InformationTask
ID-VSE for Integrity is available as a single
download from the Software Depot website:
http://h20293.www2.hp.com/portal/
swdepot/
displayProductInfo.do?productNumber=vse
Obtain ID-VSE for Integrity installation package.
IMPORTANT: The software includes a 90-day trial license for HP
9000 and HP Integrity managed systems. For details about ID-VSE
for Integrity licenses, see the HP Insight Dynamics 6.2 Getting Started
Guide.
□
“Prepare for installation” (page 12)
Prepare for ID-VSE for Integrity installation by installing the
required software and patches, establishing common WBEM user
credentials on the CMS and managed systems, and completing
preinstallation steps for Linux and Microsoft Windows managed
systems.
□
“Install the software on the CMS” (page 16)
Install HP SIM and ID-VSE for Integrity on the CMS.
□
“Start and configure HP SIM” (page 18)If HP SIM was upgraded, launch HP SIM and run the First Time
Wizard and the Discovery processes.
□
“Install Insight Dynamics agent software
and configure managed systems” (page 21)
Install the WBEM providers and other agent software on your
managed systems.
□
“Configure ID-VSE for Integrity” (page 27)Configure ID-VSE for Integrity for your environment.
IMPORTANT: ID-VSE for Integrity does not operate correctly
until you complete these postinstallation configuration steps. You
must perform these steps even when you are reinstalling or
updating an existing installation.
□
Overview checklist for upgrading ID-VSE for Integrity
Use Table 3-2 for an overview of the upgrade process for ID-VSE for Integrity on an HP-UX
CMS.
Overview checklist for installing ID-VSE for Integrity 11