HP Insight Dynamics 6.2 Integrity CMS Installation and Configuration Guide

# /opt/vse/bin/vseinitconfig -a
The vseinitconfig command logs status, errors, and exceptions to the file /var/opt/
vse/logs/vseinitconfig.log. Review the output of this command to ensure there are
no errors.
IMPORTANT: If you are upgrading from a previous version of ID-VSE for Integrity, the
vseinitconfig command migrates any product licenses that were previously installed
or scanned to the HP SIM License Manager database. Review the licensing information in
the log file to make sure that it is correct. You may need to adjust the number of licensed
cores using the vselicense command. For more information about migrating previous
licenses to the new license model, see vselicense(1M) and the HP Insight Dynamics 6.2 Getting
Started Guide.
5. When vseinitconfig finishes, you are prompted to restart HP SIM. Type “y” and press
Enter to restart HP SIM.
6. (Optional) Execute the command catman to make sure that the ID-VSE for Integrity
manpages can be listed by keyword using man -k.
Procedure 3-6 Install ID-VSE for Integrity using existing installation of HP SIM
1. Enter the following command on the CMS:
# /usr/sbin/swinstall -x autoreboot=true \
-s path-to-depot-file VSEMgmt
2. Configure ID-VSE for Integrity by entering the following command:
# /opt/vse/bin/vseinitconfig -a
The vseinitconfig command logs status, errors, and exceptions to the file /var/opt/
vse/logs/vseinitconfig.log. Review the output of this command to ensure there are
no errors.
IMPORTANT: If you are upgrading from a previous version of ID-VSE for Integrity, the
vseinitconfig command migrates any product licenses that were previously installed
or scanned to the HP SIM License Manager database. Review the licensing information in
the log file to make sure that it is correct. You may need to adjust the number of licensed
cores using the vselicense command. For more information about migrating previous
licenses to the new license model, see vselicense(1M) and the HP Insight Dynamics 6.2 Getting
Started Guide.
3. When vseinitconfig finishes, you are prompted to restart HP SIM. Type “y” and press
Enter to restart HP SIM.
4. (Optional) Execute the command catman to make sure that the ID-VSE for Integrity
manpages can be listed by keyword using man -k.
IMPORTANT: If you are reinstalling or updating an existing installation, you might have already
performed the steps in the following sections. However, you might need to repeat some of these
steps after reinstallation or upgrade. In particular, see “Configure ID-VSE for Integrity” (page 27).
You need to repeat the postinstallation configuration steps listed there, including license
management and Application Discovery certificate exchange.
Start and configure HP SIM
After installation, use Procedure 3-7 to start HP SIM and run the First Time Wizard to finish the
configuration process.
18 Installation