HP Insight Management 7.3 Update 1 Support Matrix

1
Data Center Power Control works only on Primary Addresses of a system and cannot detect a system with a non-primary address.
If a system has IPv4 as a primary address and IPv6 as a non-primary address, Data Center Power Control only works with the IPv4
address.
2
For VMhost with only an IPv6 address. Data Center Power Control cannot perform a graceful shutdown of guests. It will only
shutdown the hosts.
3
The Intelligent Power discovery feature is not supported when iPDU is configured with IPv6 addresses only
4
You can purchase the RPS option to enable Dynamic Power Capping on this server.
5
This server supports only power/thermal monitoring and capping with certain power-supply options. For detailed requirements,
see the server QuickSpecs.
6
This server supports only Power Capping. It does not support Dynamic Power Capping.
Table 59 Requirements and capabilities for HP ProLiant SL servers
Intelligent
Power
Discovery
4
Data
Center
Power
Control
2,3
Calibrated
Maximum
Power
Power
Metering
Data
Center
Thermal
Mapping
Dynamic
Power
Capping
Power
Regulator
Power
Topology
Minimum
system BIOS
version
Minimum
iLO
firmware
version
Server model
1
✓P75
08/28/2013
iLO 4
version
ProLiant
SL230s
1.30 or
later
✓iLO 4
version
1.01
ProLiant
SL230s Gen8
✓P75
08/28/2013
iLO 4
version
ProLiant
SL250s
1.30 or
later
✓iLO 4
version
1.01
ProLiant
SL250s Gen8
✓P75
05/11/2012
iLO 4
version
ProLiant
SL270 Gen8
1.10 or
later
✓P75
08/26/2013
iLO 4
version
ProLiant
SL270s
1.30 or
later
✓✓P83
08/28/2013
iLO 4
version
ProLiant
SL2500
1.30 or
later
Gen8 Plus 2U
multi-node
✓✓✓✓✓✓P74
01/20/2013
ILO4
version
ProLiant
SL4540
Gen8 1.30 or
later
✓✓P74
08/12/2012
iLO 4
version
ProLiant
SL4540
1.10 or
later
Gen8
HyperStorage
System
✓A31
06/15/2012
iLO 3
version
1.50
ProLiant
SL4545 G7
HyperStorage
System
5
78 Hardware requirements and supported capabilities for Insight Control power management