HP Insight Management 7.3 Update 1 Support Matrix

Table 61 Requirements and capabilities for HP Integrity NonStop servers (continued)
Intelligent
Power
Discovery
4
Data
Center
Power
Control
2,3
Calibrated
Maximum
Power
Power
Metering
Data
Center
Thermal
Mapping
Dynamic
Power
Capping
Power
Regulator
Minimum
system
BIOS
version
1
Minimum
iLO
firmware
versionServer model
✓N/ANoneIntegrity NonStop
NS5000T
✓N/ANoneIntegrity NonStop
NS3000AC
✓N/ANoneIntegrity NonStop
NS2000
✓N/ANoneIntegrity NonStop
NS2000T
✓N/ANoneIntegrity NonStop
NS1x00
1
The BIOS version does not apply to these servers.
2
Data Center Power Control works only on Primary Addresses of a system and cannot detect a system with a non-primary address.
If a system has IPv4 as a primary address and IPv6 as a non-primary address, Data Center Power Control only works with the IPv4
address.
3
For VMhost with only an IPv6 address. Data Center Power Control cannot perform a graceful shutdown of guests. It will only
shutdown the hosts.
4
The Intelligent Power discovery feature is not supported when iPDU is configured with IPv6 addresses only
5
Minimum iLO firmware version for Power Regulator functionality is 1.40.42, which is included in system firmware bundle version
26.05
Supported power-delivery devices for Insight Control power management
Table 62 Supported power-delivery devices
Minimum firmware versionDevice
12.1.6Eaton Power Xpert Meter 8000
v1.4HP Intelligent Power Distribution Unit
P 1.00.10HP PDR Management Module
1.00.14HP PDU Management Module
01.03.05Raritan Dominion PX (DPCS20A 30L6)
01.02.07Raritan Dominion PX (PX-5532)
v3.3.3APC rPDU
2.rALiebert EM PDU Controller
2.0.HEaton Powerware Switch ePDU
6.0gServerTech Sentry Switch CDU
V0208001IBM DPI PDU+
2.0.05HP UPS Management Module
Supported power-delivery devices for Insight Control power management 81