HP Insight Management 7.3 Update 1 Support Matrix

Table 72 Requirements for managed system — managing from an HP-UX CMS (continued)
Table 54 (page 63) lists the latest version of the Utilization Provider
provided with this release of the Matrix Operating Environment.
The Application Discovery WBEM Provider version A.04.01 or later is
required on all systems that Application Discovery will manage. For the
latest version, see Table 54 (page 63).
Application Discovery WBEM Provider
The gWLM agent is required on all systems that gWLM will manage.gWLM Agent
For details on the appropriate version(s) of gWLM, see HP Global
Workload Manager User Guide.
HP recommends that you upgrade to the latest version of the gWLM agent.
For the latest version, see Table 54 (page 63).
Install this software on HP-UX managed systems even if the system does
not use nPartitions.
nPartition Provider
• HP-UX 11i v2 on HP 9000 requires version B.23.01.07.05 or later.
• HP-UX 11i v2 on HP Integrity requires version B.23.01.07.05 or later.
• HP-UX 11i v3 requires version B.31.02.01 or later.
For the latest version, see Table 54 (page 63).
You must install VM Provider version 1.20 or later on HP Integrity VM host
systems. You can use earlier versions of the VM Provider on individual
VM Provider
virtual machines. Installed versions of HP Integrity Virtual Machines, VM
Provider, and VMGuestLib must be compatible. Do not mix different versions
of these components on the same system.
For the latest version of the VM Provider, see Table 54 (page 63).
IMPORTANT: You cannot install the VM Provider on systems that are
running HP-UX 11i v3 (B.11.31).
The vPar Provider that was included with the March 2006 release of HP-UX
11i v2 (B.11.23) does not work properly. With the March 2006 version
vPar Provider
installed, Systems Insight Manager and Matrix Operating Environment do
not discover and display virtual partitions correctly. The vPar Provider that
is included with Matrix Operating Environment fixes this problem. However,
it presents the same version number as the March 2006 version.
This problem does not occur with the HP-UX 11i v3 (B.11.31) vPar Provider.
You can fix this problem by executing the following command on each
system where the vPar Provider has been installed:
/opt/wbem/bin/cimmof -n root/cimv2/vpar \
/opt/vparprovider/mof/HPUX_VParLocalPartition.mof
Alternatively, on systems that are running HP-UX 11i v2, you can remove
the installed version of the vPar Provider and install the version delivered
with the Matrix Operating Environment (or forcibly reinstall the Matrix
Operating Environment version).
For the latest version of the vPar Provider, see Table 54 (page 63).
Agents and providers bundled with the Matrix Operating Environment
For a list of the agents and providers that are bundled with the Matrix Operating Environment, see
Table 54 (page 63).
96 HP-UX CMS requirements