HP Integrity Virtual Machines 4.2: Installation, Configuration, and Administration

9.9.3 Inspect and Edit the Repair Script
The hpvmdevmgmt -r report and repair-script function might identify one or more new
pathnames for disks whose old pathnames no longer exist. The repair-script performs that
reassignment using the hpvmdevmgmt -n command.
In general, you should inspect and edit the script before running it for the following reasons:
• All replace commands, hpvmdevmgmt —n, in the script are commented out. You must delete
only the comment characters before only one of the hpvmdevmgmt —n commands for a
particular device. Otherwise, subsequent hpvmdevmgmt -n commands for the same device
will fail.
• If a legacy device name is replaced with another legacy device name, both the legacy device
name and the agile device name are added. However, if the agile device name is used to
replace a legacy device name, only the agile device name is used.
9.10 HP AVIO Stor EFI Driver Enumeration Policy
The default enumeration policy of the “HP AVIO Stor EFI Driver” is to enumerate all LUNs, —
that is, to discover and list all the LUNs under the AVIO storage adapter. Use the drvcfg EFI
utility to change the enumeration policy to do the following:
• Enumerate boot LUNs only.
• Enumerate all LUNs.
The following example shows how to change the enumeration policy to enumerate boot LUNs
only:
Shell> drvcfg -s
HP AVIO Stor Driver Configuration
==================================
Enumerate only boot LUNs (Y/N)? [N]:Y
Drv[2F] Ctrl[ALL] Lang[eng] - Options set. Action Required is None
None
None
Shell>
Reset the guest for the change to take effect
vMP MAIN MENU
CO: Console
CM: Command Menu
CL: Console Log
SL: Show Event Logs
VM: Virtual Machine Menu
HE: Main Help Menu
X: Exit Connection
[g1] vMP> CM
(Use Ctrl-B to return to vMP main menu.)
[g1] vMP:CM> RS
At next boot only boot LUN will be enumerated
Use ^ and v to change option(s). Use Enter to select an option
Loading.: EFI Shell [Built-in]
EFI Shell version 1.10 [14.62]onsole - - - - - - - - - - - -
Device mapping table
fs0 : Acpi(PNP0A03,0)/Pci(0|0)/Scsi(Pun0,Lun0)/HD(Part1,SigBEC59C34-E6C8-11DB-8002-D6217B60E588)
fs1 : Acpi(PNP0A03,0)/Pci(0|0)/Scsi(Pun0,Lun0)/HD(Part3,SigBEC59C70-E6C8-11DB-8004-D6217B60E588)
blk0 : Acpi(PNP0A03,0)/Pci(0|0)/Scsi(Pun0,Lun0)
blk1 : Acpi(PNP0A03,0)/Pci(0|0)/Scsi(Pun0,Lun0)/HD(Part1,SigBEC59C34-E6C8-11DB-8002-D6217B60E588)
blk2 : Acpi(PNP0A03,0)/Pci(0|0)/Scsi(Pun0,Lun0)/HD(Part2,SigBEC59C52-E6C8-11DB-8003-D6217B60E588)
blk3 : Acpi(PNP0A03,0)/Pci(0|0)/Scsi(Pun0,Lun0)/HD(Part3,SigBEC59C70-E6C8-11DB-8004-D6217B60E588)
startup.nsh> echo -off
setting hpux path(\EFI\HPUX)...
type 'fs[x]:' where x is your bootdisk (0, 1, 2...)
type 'hpux' to start hpux bootloader
164 Managing Guests