HP Storage Provisioning Manager (SPM) version 2.3 User Guide

C Working with HP P6000/EVA disk arrays
HP P6000/EVA disk arrays have several value-add features. It is important to understand how
SPM handles management of environments using those features. The following sections describe
these features.
Understanding how to import HP P6000/EVA disk arrays into SPM
Using the SPM Import Array feature, EVA x400 and P6000 arrays can be imported into SPM.
This enables storage pools and volumes on the array to be imported. An SPM storage pool object
maps to an EVA disk group. (In this section, the terms storage pool and disk group are used
interchangeably.) When running the array import wizard, a set of authentication credentials must
be provided. The credentials include the IP address of the management server where HP P6000
Command View Software is running, and the username and password for accessing HP P6000
Command View Software. Note that if HP P6000 Command View Software is not running on the
default port, that port must be appended to the hostname with a “:” separator (for example,
“myHost:2345”). SPM accesses the HP P6000 Command View Software using the credentials
provided. The user name/password combination should be in the Command View server's “HP
Storage Admins” group.
Once credentials are entered, HP P6000/EVA disk arrays that are actively managed by HP P6000
Command View Software are listed as available for import. After importing the HP P6000/EVA,
storage pools may be imported. This step of the import wizard shows a list of available storage
pools in the selected arrays. Note that SPM cannot create storage pools on the HP P6000/EVA.
After importing existing storage pools from the HP P6000/EVA, volumes may be imported. The
list of available volumes is limited based on the disk groups that are imported. There are several
classes of volumes that cannot be imported: snapshot volumes and remote copy volumes are all
ignored by SPM's import wizard.
NOTE: Unsupported models, like the EVA 3000/5000, are not listed as available for import.
Even though these arrays may be reported within the HP P6000 Command View Software, they
are obsolete and unsupported by SPM. For more information, see “Minimum requirements” (page
12).
Understanding P6000/EVA capacity reporting
SPM tracks capacity for storage pools and volumes within its catalog. These capacity values are
used to generate candidates for storage provisioning. In order to understand the candidate
generation process, it is important to know what SPM tracks and how that relates to EVA modeling
of storage pools and volumes.
Storage pool capacity
At the storage pool level, SPM tracks physical capacity, committed capacity, and subscribed
capacity. Physical capacity is the total number of bytes that are physically allocated to the storage
pool. Committed capacity represents the space that has been allocated within the pool for all of
its volumes. Subscribed capacity is the total capacity for all the volumes contained in the pool.
Additionally there is a calculated value, “available capacity”, which is used when selecting
candidate pools for volume creation or growing.
In the P6000/EVA resource model one finds that the combined capacity of all storage pools
represents the raw available capacity of the P6000/EVA system. This raw available capacity can
be then used to create Vdisks or Volumes. Total raw capacity may be obtained from the array
76 Working with HP P6000/EVA disk arrays