HP Capacity Advisor 7.2 User Guide

Procedure 37 Calibrating Insight Control power management
• Click the “Calibrate” link.
Results are posted in the Last Attempted Auto-Calibration table.
If an error is indicated, read the “Troubleshooting” and “Notes” column for help on fixing the
error.
Procedure 38 Clearing current power management calibration values
• Click the “Clear Calibration Data” link.
Calibration values are deleted. Results are posted in the Last Attempted Auto-Calibration table.
If an error is indicated, read the “Troubleshooting” and “Notes” column for help on fixing the
error.
Procedure 39 Updating HP iLO data and calibration
• Click the “Collect iLO Data” link.
The latest power usage data for this system is obtained and used to update the calibration for
this system. Results are posted in the Last Attempted Auto-Calibration table.
If an error is indicated, read the “Troubleshooting” and “Notes” column for help on fixing the
error.
Procedure 40 Configuring power management
1. Examine the Power Management Plug-in Configuration table.
2. In order of presentation, configure or correct each step listed in the table, as needed.
a. Look at the icon in the Status column. If the status icon shows:
• , then the step is working correctly.
• , then this step is not working correctly.
• , indicates waiting for a previous step to complete successfully.
b. Fix errors in the order that they appear in the table. Use the information in the Notes
column to determine what you need to do. Use the links in the Help column to resolve the
problem(s) for that step.
3. When all the icons show a green status, select Apply or OK to complete the power calibration
for the selected system. .)
86 Procedures