HP Insight Orchestration 6.0 User Guide

should be set to 10. If you set the attribute to a greater value, then physical logical server provisioning might
fail.
Physical provisioning requires:
• Available VC Domain groups on the Virtual Connect Enterprise Manager (VCEM)
• Configuring server deployment platforms including Insight Controller server deployment, Ignite-UX, or
HP Server Automation and creating job folders
• Creating SAN-backed storage
Verifying VC Domain groups
Insight Orchestration requires virtual domain groups. To create a virtual domain group or verify an existing
group, see the HP Virtual Connect Enterprise Manager User Guide .
Configuring Insight Control server deployment
Creating server deployment job folders
For each operating system that Insight Orchestration will use to deploy physical servers, you must create
top-level Insight Control server deployment job folders:
1. Create a top-level Insight Control server deployment job folder for each operating system. Right-click in
the empty space of the Jobs panel and selecting New Folder from the list.
2. Rename the new folder, for example, HPIO RHEL54 BL BFS.
3. Copy the Deploy ProLiant System Configuration (BL BFS) job from the HP Deployment
Toolbox/2→Hardware Configuration folder, and paste it into the new folder created.
4. OS jobs can be found under OS Installation→Hardware Configuration (or under HP Deployment
Toolbox/3B→OS Imaging if you have already captured customized OS images to be deployed); HP
management agent jobs can be found under HP Deployment Toolbox/4→Software which should be
installed after the OS is deployed. For example, in the HPIO RHEL54 BL BFS job folder highlighted in
the following screenshot, enter 01 in front of the 1st job, Deploy ProLiant System Configuration (BL BFS);
enter 02 in front of the 2nd job, DeployRHEL 5.4 x64 (EN-US); enter 03 in front of the 3rd job, Install
Configuring your environment for physical provisioning 15