HP Insight Orchestration 6.0 User Guide

4. Press the Enter key to reboot the system. When the system reboots, all the HBA configuration parameters
are re-supplied by Virtual Connect and your server returns to normal operation.
Increasing VMware Service console memory and CPU shares
The memory and CPU shares that are allocated to the VMware Service console may be increased to obtain
better performance on the VMHost. Login in to the Virtual Center server which is providing management for
the VMHost(s) and perform the following changes:
1. Increase the amount of RAM assigned to the ESX 3.X or ESX 4.X Service console:
a. Log in to VirtualCenter from the Virtual Infrastructure Client with a user that has administrative rights.
NOTE: If you do not have VirtualCenter, log in directly to the ESX host as root.
b. From the Inventory select the ESX Server host.
c. Select the Configuration tab.
d. Click Memory.
e. Click Properties.
f. On the Memory window enter a value between 256MB and 800MB for the service console
parameter.
NOTE: For troubleshooting purposes, VMware recommends that you increase the service console
RAM to 800MB.
g. Click OK. The changes do not take effect until the ESX host is rebooted.
Corrective procedures 83