HP Integrity Virtual Server Manager 6.3 User Guide

Deleting virtual iLO remote console
The Delete option in the Console tab allows you to delete the current IP address and Netmask of
the virtual iLO remote console for the selected VM or vPar.
To delete the virtual iLO remote console settings of a VM or a vPar:
1. Click Delete against the VM or vPar for which you want to delete the virtual iLO remote console
details. The Delete virtual iLO remote console screen is displayed.
Figure 76 Delete virtual iLO remote console
2. Click OK to delete the settings for the virtual iLO remote console.
Deleting DIOs
You can delete the DIOs of a VM or vPar.
Figure 77 Delete DIOs page
To delete the DIOs of a guest:
1. Select a guest from the Virtual Servers tab.
2. Click Delete→Delete DIO.... The Delete DIOs... page is displayed.
The Delete DIO... menu is enabled only after you select a guest. If more than one guest is
selected, the menu items are not enabled.
3. Click Command Preview to preview the commands that are executed to delete the selected
DIOs. To add parameters, bus, device, and MAC addresses of the DIO in commands, select
the Specify virtual address parameters in command preview (advanced) check box. By default,
the box is not selected.
4. Click OK to execute the commands and delete the selected DIOs.
110 Working with VMs or vPars