HP Integrity Virtual Server Manager 6.3 User Guide

Clearing the Remove VLAN Assignment check box causes vswitch VLAN port assignments to remain
after the vPar is deleted.
To remove one or more vPars:
1. Select one or more vPars from the Virtual Servers tab.
2. Select Delete→Delete Virtual Partition. The Delete Virtual Partition screen is displayed.
Figure 88 Delete virtual partition
3. Click OK to delete the selected vPars.
Opening iLO console
For details about opening iLO console, see “Opening iLO console” (page 108).
Opening virtual iLO remote console
For details about opening virtual iLO remote console, see “Opening virtual iLO remote console”
(page 109).
Deleting virtual iLO remote console
For details about deleting virtual iLO remote console, see “Deleting virtual iLO remote console”
(page 110).
Adding DIOs
For details about the adding DIOs, see “Adding DIOs” (page 111).
Replacing DIO H/W path
For details about replacing H/W paths, see “Replacing DIO H/W path” (page 111).
Replacing DIO MAC address
For details about replacing DIO MAC addresses, see “Replacing DIO MAC address” (page 112).
Deleting DIOs
For details about deleting DIOs, see “Deleting DIOs” (page 110).
122 Working with VMs or vPars