HP Integrity Virtual Server Manager 6.3 User Guide

This command lists all the configuration parameters. Verify whether the
enableNamespaceAuthorization parameter is set to TRUE. If it is set to TRUE, follow
these steps:
1. To access WBEM Providers from HP Systems Insight Manager, run the following command:
# cimauth -a -u <SIMUSER> -n root/cimv2/hpvm -R -W
# cimconfig -s enableNamespaceAuthorization=true -p
where, SIMUSER is the username created for SIM access.
2. To access WBEM Providers from HP SMH, run the following command:
# cimauth -a -u <SMHUSER> -n root/cimv2/hpvm -R -W
# cimconfig -s enableNamespaceAuthorization=true -p
where, SMHUSER is the username created for SMH access.
• The user is not authorized to monitor the VSP in Systems Insight
Manager/Matrix Operating Environment. Authority to monitor the VSP
is required when using Integrity Virtual Server Manager for accessing
the VSP or for accessing any hosted VM within the Matrix Operating
Environment environment.
To use Integrity Virtual Server Manager, an Systems Insight Manager/Matrix Operating
Environment user must have at least Monitor Tools authorization for the VSP system. If a user
has authority to manage an individual VM or vPar but is not authorized within Systems Insight
Manager/Matrix Operating Environment to monitor the VSP system that contains it, the error
message appears when the user selects the Integrity Virtual Server Manager icon in the VM's
or vPar's system box displayed by the HP Matrix OE visualization Visualization tab. To return
to HP Matrix OE visualization, select All VSE Resources in the left-hand navigation pane of
Systems Insight Manager/Matrix Operating Environment (System and Event
Collections→Systems→Shared→Systems by Type→All VSE Resources).
• The VSP is not known to Systems Insight Manager/Matrix Operating
Environment. The VSP must be known to use Integrity Virtual Server
Manager for the VSP or for any VSPed by it.
It is possible that a VM or a vPar might be discovered by Systems Insight Manager while the
containing VSP has not yet been discovered. To use Integrity Virtual Server Manager, both
the VM or vPar and the containing VSP must be discovered by Systems Insight Manager. This
error message appears when you select a VM or vPar link in the VM or vPar system box
displayed in HP Matrix OE visualization before Systems Insight Manager has discovered the
VM's or vPar's VSP. To return to HP Matrix OE visualization, select the All VSE Resources link
in the left-hand navigation bar of Systems Insight Manager (System and Event
Collections→Systems→Shared→Systems by Type→All VSE Resources).
• The user is not authorized to use Integrity Virtual Server Manager
on this VSP.
With HP SMH, Integrity Virtual Server Manager is configured by default to permit read-only
access to HP SMH users with User-level privileges, and read-write access to HP SMH users
with Operator-level and Administrator-level privileges. However, it is possible to reconfigure
these permissions to deny all Integrity Virtual Server Manager access to User-level and
Operator-level users. In this case, these users can log into HP SMH, but they are denied access
to Integrity Virtual Server Manager. To return to the SMH Homepage, select Home in the top
navigation link.
With Matrix Operating Environment for HP-UX, users need VSE All Tools authorization to view
all Integrity Virtual Server Manager screens and perform all Integrity Virtual Server Manager
menu actions.
If other messages are displayed on an Access failure page, contact your HP Technical Support
Representative for further assistance.
140 Error messages, status indicators, and troubleshooting