HP Integrity Virtual Server Manager 6.3 User Guide

Status indicators
In several actions and views, the status of a component is represented by an icon next to the
component name or label. For example, the icon next to the name of a VM or a vPar shows whether
the VM or vPar is up or down. A question mark (?) means no information is available.
Table 17 explains the meaning of each status icon.
Table 17 Status icons
Possible meanings in more detailIndicationIcon
The VM or vPar is started or starting; devices are powered on and
active; the operating system is up or in the last part of the boot
sequence; no fault was detected.
On/Up/Normal
The VM or vPar has stopped or is stopping; the devices are powered
off, or powered on but inactive; the operating system is down, shutting
down, or in the first part of the boot sequence. For a VM that has
migrated to another VSP (the target), this icon indicates the VM is no
longer runnable on the source VSP, meaning that you cannot start or
modify it. After the migration has finished, you can delete the VM from
the source VSP.
Off/Down/Disabled
The VM is in a suspended state.Suspended
The VM or vPar is configured as a Serviceguard package; flyover text
indicates the VM or vPar is a Serviceguard package.
Serviceguard package
The VM or vPar is a Serviceguard package that is running on another
VSP; flyover text indicates hardware status (On) and the name of the
VSP.
Managed by another
VSP
The Integrity Virtual Server Manager cannot read information about
VMs or vPars or devices, or cannot obtain this information from the
remote WBEM services provider. This does not necessarily indicate an
error condition. For example, some information (such as memory
configuration) cannot be obtained if the VM or vPar is powered off or
has not completed a restart.
Unknown
A critical problem with the VM or vPar or device configuration has
been detected.
Critical
The VM or vPar is experiencing major performance problems.Major
The VM is currently migrating from this VSP (source) to another VSP
(target).
Migrating to another
VSP
The VM is currently migrating from another VSP (source) to this VSP
(target).
Migrating from
another VSP
The VM is in queue, waiting to migrate. When multiple VMs are
selected to migrate, only one is migrated at a time.
Waiting for migration
An error was detected during the latest attempt to migrate one or more
VMs to another VSP.
Migration error An
error was detected
during the latest
attempt to migrate one
or more VMs to
another VSP.
Utilization meter status/error information
When a utilization meter visible on one of the Integrity Virtual Server Manager tabs is dimmed
(rather than displaying a utilization value), a label indicates the probable cause. The following list
describes the labels or status indicators:
Status indicators 141