HP Integrity Virtual Server Manager 6.3 User Guide

Using the Modify menu
The Integrity Virtual Server Manager Modify menu allows you to perform actions on a selected VM
or vPar. The options displayed when you select the Modify menu using Integrity Virtual Server
Manager from HP Matrix Operating Environment are shown in Figure 56. The options are available
only when you are in a VM or vPar Properties view or in a view in which you have selected a VM
or vPar, such as on the VSP Virtual Servers tab. You can only modify one VM or vPar at a time.
If the VM or vPar being modified is an HP Serviceguard package, you must make the same
modifications to the VM or vPar on the other VSPs in the cluster.
NOTE: When you use Integrity Virtual Server Manager from HP SMH, this menu includes an
additional option that allows you to modify WBEM credentials. This option can be available from
any Integrity Virtual Server Manager view.
Figure 56 Integrity Virtual Server Manager Modify menu
Table 11 describes the Modify menu options. More information about the various modification
options is provided in “Modifying vPars” (page 116). More detailed information is provided by the
Integrity Virtual Server Manager help and the HP-UX vPars and Integrity VM Administrator Guide
manual.
Table 11 Integrity Virtual Server Manager Modify menu options
Action SummaryMenu Selection
Modifies the number of virtual CPUs allotted to a VM or a
vPar that has been configured for symmetric
multiprocessing. The changed value takes effect when the
VM or vPar is restarted.
Modify→CPU Count...
Modifies the amount of virtual memory (entitlement) to
allocate to the VM or vPar. Allows you to set dynamic
memory parameters if dynamic memory is supported on
the VM or vPar OS. The changes take effect when the VM
or vPar is restarted. Supports online memory operations
on active vPars.
Modify→Memory...
Modifies the LAN assignments of virtual switch ports
connected to the VM or vPar
Modify→VLAN Settings...
Modifies the IP address and the Netmask of the virtual iLO
remote console of a VM or vPar guest.
Modify→Add/Modify Virtual iLO Remote Console...
Adds a virtual storage device to a VM or vPar, where the
virtual storage device is backed by physical storage and
connected to a virtual storage adapter on the VSP.
Modify→Add Storage Device ....
Adds a network device to a VM or vPar, where the network
device is associated with a virtual switch. Allows you to
create a new virtual switch.
Modify→Add Network Device...
78 Using Integrity Virtual Server Manager menus