HP Matrix Operating Environment 7.0 Recovery Management User Guide

User Defined storage adapter interface specification
The following three commands are defined in the User Defined storage adapter interface
specification:
• validatesms.cmd — validates a Storage Management Server during configuration.
• validatesrg.cmd — validates a Storage Replication Group during configuration.
• failoversrg.cmd — fails over a Storage Replication Group while Recovery Group activation
occurs.
Command line arguments:
• For validatesms.cmd
sms_name=<name of a Storage Management Server>
sms_username=<login name for a Storage Management Server>
• For validatesrg.cmd
sms_name=<name of the Storage Management Server at the Local Site>
sms_username=<login name for the Storage Management Server at the
Local Site>
srg_name=<name of the Storage Replication Group to be validated>
local_storage_id=<unique identifier of the storage system at the
Local Site>
remote_storage_id=<unique identifier of the storage system at the
Remote Site>
NOTE: Volumes in the Storage Replication Group (identified by srg_name) are replicated
between the local storage system (identified by local_storage_id) and the remote storage
system (identified by remote_storage_id)
• For failoversrg.cmd
local_sms_name=<name of the Storage Management Server at the Local
Site>
local_sms_username=<user name for the Storage Management Server at
the Local Site>
local_storage_id=<unique identifier of the storage system at the
Local Site>
remote_sms_name=<name of the Storage Management Server at the Remote
Site>
remote_sms_username=<user name for the Storage Management Server at
the Remote Site>
remote_storage_id=<unique identifier of the storage system at the
Remote Site>
srg_name=<name of the Storage Replication Group to be failed over>
use_non_current_data=<yes or no>
NOTE: A value of yes requires the Storage Replication Group to be failed over even in
cases where the data at the destination site may not be current. A value of no requires storage
failover to fail if the data at the destination is not current.
14 Installing and configuring Matrix recovery management