HP Matrix Operating Environment 7.3 Update 1 Installation and Configuration Guide for Provisioning with Virtual Resources
Clear all of the items except the following:
• WMI Mapper
• HP Systems Insight Manager
• HP Insight managed system setup wizard
• HP Insight Control virtual machine management
• HP Insight mxsync Utility
• HP Matrix Operating Environment capacity planning, configuration and workload
management and HP Insight Capacity Advisor Consolidation software
• HP Matrix infrastructure orchestration
• HP Insight Control licensing and reports
• HP Insight Management Advisor
NOTE: If the HP System Management Homepage was installed as part of the SPP online
components then you cannot clear the selection.
Clearing some of the selected items will cause warnings to appear — click OK for each one.
Click Next when finished customizing the product installation list.
The notices and warnings that appear are expected, and you can safely ignore them.
12. The HP Insight Management DVD #2 Selection screen appears when you are installing or
upgrading components that reside on DVD #2. The items to be installed from DVD #2 appear
on the screen. Make sure you choose the appropriate mechanism for presenting DVD #2 that
corresponds to the drive or utility you are using. Click Next.
13. The Check for prerequisites screen summarizes the items required for installation (and that
were verified using the Insight Management Advisor). Click Next to proceed with the
installation.
34 Installing Insight Management software on the CMS