HP Matrix Operating Environment 7.3 Update 1 Installation and Configuration Guide for Provisioning with Virtual Resources

Click Yes to continue the installation.
A reboot will occur partway through the installation of the components. The installation continues
automatically.
NOTE: The system will normally auto-login and continue installing after the reboot unless
that feature was not enabled in a previous step. Manual login will always be required to view
the installation results.
If you originally connected to the CMS using Microsoft Remote Desktop Connection, remember
to reconnect using the mstsc /console or /admin switch (depending on your client version).
25. After installation is complete, review the Installation status screen to verify that all components
were installed successfully. If there were errors, go to “Installation errors” (page 44).
42 Installing Insight Management software on the CMS