HP Matrix Operating Environment 7.3 Update 1 Installation and Configuration Guide for Provisioning with Virtual Resources

IMPORTANT: If the Insight Control server provisioning is used as a deployment server, you must
specify the IP address of the deployment server. Do not specify the IP address of the Insight Control
server provisioning media server.
If an HP Server Automation server is specified during the initial installation, the file
opswclient.jar is copied from the SA core to the CMS to ensure version compatibility. If you
instead register an HP Server Automation server after the installation as described in this section,
you must also copy the file /opt/opsware/twist/extlib/client/opswclient.jar from
the SA Core server to the CMS into C:\Program Files\HP\Systems Insight Manager\
lib.
Overwrite any file of the same name (do not rename or otherwise leave any additional files in the
folder on the CMS).
Once the file opswclient.jar is properly copied, stop and restart HP SIM using the commands
mxstop and mxstart.
Registering deployment servers 67